Description
This hall effect triggered Ignition is a programmable replacement unit.
It has the input trigger ability for a hall effect sensor.
With this unit you’ll have the ability to program an ignition curve of your desire, and have an offset per cylinder that you can check with a strobe light to ensure perfect timing even with ignition pickup variations. Multiple input and outputs that can be programmed such as a retarded map for changes in fuel, Soft cut rev limiter and 2 stage shift lights just to name a few.
This item comes with the loom tails, and is pre-programmed with the standard curve. Wiring instructions are here beltandbevel.com.au/how-to/
If you plan on using your Ducati regularly as they should be, you would be mad not to have this ignition unit fitted. It communicates to a laptop or PC for programing via Serial to USB. Software is Here https://www.ignitech.cz/en/stahnout/aktualni-softwarehttp://www.ignitech.cz/exe/tcip4_v88.exe
*Resisted plug caps are required* Ignition unit will be damaged without them. *Set the base advance in accordance with the Ignitech installation notes*
TCIP4HAL
